- 72 -UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
Monitoring Data for Overload Relay
Word Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit1 Bit 0
0
0
Summary
Warning
Summary
Fault
- - Overload
warning
- - -
1
UMC100
DI5
UMC100
DI4
UMC100
DI3
UMC100
DI2
UMC100
DI1
UMC100
DI0
- -
1 2, 3
Remaining data see section Parameters and Data Structures on a Fieldbus
2 4, 5
3 6, 7
4 8, 9
5 10.11
6
12
13
7
14
15
The table above represents the data allocation as realised with the built-in standard applica-
tions. It may differ for customer-specific applications!
Command Data Overload Relay
Word Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit1 Bit 0
0
0
- Fault
Reset
- Prepare
Emergency
Start
- - - -
1
UMC100
DO2
1)
- - UMC100
24VDC
Out
1)
- - - -
1
2 Remaining data see section Parameters and Data Structures on a Fieldbus
3
2 4, 5
3 6, 7
1)
Controlled by UMC100 if configured as fault output.
The table above represents the data allocation as realised with the built-in standard applica-
tions. It may differ for customer-specific applications!
To Next Page
Loading...
