- 99 - UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
Masks on the top level and the main configuration menu masks.
Feldbus
address
Motor
current[%]
Motor
current [A]
Status UMC
Digital Inputs
Status UMC
Digital outputs
User defined
masks(1-5)
From any
menu point
(right hotkey)
from any
menu point
(left hotkey)
1: Motor Management
(e.g. control function)
2: Protection
(e.g. trip class)
3: Communikation
(e.g. bus address)
4: I/O modules
(e.g. DI function)
5: Display
(e.g. language)
6: Maintenance/Service
(e.g. changed parameters)
Main menu
Main Configuration Menu
Phase to phase
voltages*
Active power*
Power Faktor*
With the right soft key you can enter the selected submenus which are described in the following
sections. The masks shown with a star * are only displayed if the voltage module is present.
To Next Page
Loading...
