ABB UniGear ZS3.2

ASSEMBLY OF THE SWITCHGEAR AT SITE 31
—
5/17 Insulating covers
for busbars
—
5/18 Guiding ramp
for circuit-breaker
insertion, optional.
The rail on the
guiding ramp must
be in line with the
guiding rail in the
UniGear ZS3.2 panel.
Cut place for abzweig-
schienen-system 2x100x10
Cut place for sammel-
schienen-system D 100
—
5/17
—
5/18
58.5 Lid for cover