ABB UniGear ZS3.2 - Page 36

36 UniGear ZS3.2 INSTRUCTION MANUAL
—
6/5 Interlock yoke
with sliding handles
which will be moved
inwards to release
the circuit-breaker
part for withdraw
from the panel.
—
6/6 Withdrawable
part in service
position, interlock
yoke engaged,
control wiring
pluged-in and
engaged.
—
6/7 Operating
accessories
—
6/5
—
6/7
—
6/6
51 Interlock yoke
51.1 Catch pin, spring loaded
51.2 Sliding handle
51.4 Blocking shaft (interlocking circuit-breaker and earthing switch)
122 Operating lever (for earthing switch)
128 Charging lever (for circuit-breaker)
145 Three bit key (ON-OFF) operation
146 Hand 128 145 146 122 cranck (for moving the withdrawable part)
10 Control wiring plug connector, closed
10.1 Control wiring socket
10.2 Control wiring plug
10.4 S8 /Limit switch for test position indicator
10.5 S9 /Limit switch for service position indicator
51 Interlock yoke
51.3 Guide rail (panel)
54 ON-OFF operating shaft
51
51.2
51.4
51.1
51.3 10.4 10.5
54
51
10
10.1
10.2
128 145 146 122