Abbott Precision Xtra - How to Recall the LOT Number

Calibrating
Your Monitor
How to Recall the LOT Number or Calibration Code
1
To recall the glucose LOT number, Press and Hold the
button. While holding the button, Press and Hold
the
button.
The Display Check shows on the
display window, then the glucose
LOT number shows with the time,
month, and day of the most recent
glucose calibration.
2
After the glucose LOT number is displayed, you can
recall the β-Ketone LOT number. Press and Release the
button or the button.
The β-Ketone LOT number shows
with the word “CODE”, the time,
month, and day of the most recent
blood β-Ketone calibration.
▼
Note: If the LOT number that shows on your monitor’s display
window is not correct:
What It Means:
Your monitor may not be calibrated for the box of test
strips you are using.
What To Do:
• Re-calibrate your monitor.
• Check that you are using the calibrator that came in
the box of test strips you are using.
Remember, improper calibration will cause
incorrect results.
3
Press and Hold the button to
turn your monitor off.
17