Monitoring Blood
β-Ketone
How to Monitor Your Blood β-Ketone
Getting Started
1
Prepare your lancing device.
▼
2
Wash your hands using warm
soapy water and dry them
completely.
3
Remove the test strip from its foil packet.
4
Insert the three black lines at
the end of the test strip into
the strip port.
5
Push the test strip in until it stops.
The monitor turns on automatically.
These items show on the display
window, one after the other:
• Display Check – Remember to make
sure that all items in the picture
here show on the display window.
(See Chapter 1 for more information
about the Display Check.)
Note: For pictures that show how to open the blood
β-Ketone test strip foil packet, please see the information
card in the box of blood β-Ketone test strips.
29
To Next Page
Loading...
