Lancets and Lancing Device
• Lancets are for one-time use only. Use a new lancet
each time you monitor.
• Discard your used lancet properly. Put it in an
empty puncture-resistant container, such as a
plastic milk carton or detergent bottle.
• Never share your lancing device or lancet with
another person.
Applying the Blood Drop to the Test Strip
1
Touch the blood drop to the white area
at the end of the test strip. The blood is
drawn into the test strip.
Note: If the monitor shuts off before you
apply blood to the test strip, remove the test strip
from the monitor and try again.
2
Continue to touch the blood drop to the end of
the test strip until the monitor begins the test. The
monitor begins the test when:
• You hear the beeper, if the beeper is ON.
• The display window shows the status bar.
• Then the display window shows the
countdown.
Note: Do not remove the test strip
from the monitor or disturb it during
the countdown.
Countdown
Status bar
22
Monitoring
Blood Glucose
To Next Page
Loading...
