Abbott Precision Xtra - Page 52

Message
What It What You
Means Need to Do
Error Messages
Blood applied to
test strip too soon.
Calibration/Test
strip error.
Test strip error.
Test strip is
damaged, used, or
the monitor does
not recognize it.
•
Review the monitoring
instructions.
• Monitor again with a
new test strip.
• If the error message
appears again, contact
Customer Care.
• Repeat the calibration
using the calibrator
bar that came with
the test strip you are
using.
• Check the date setting
on your monitor.
• Check the expiration
date on the test strip
foil packet.
• If the error message
appears again, contact
Customer Care.
• Monitor again using a
test strip designed for
use with Precision Xtra
monitors.
• If the error message
appears again, contact
Customer Care.
49