Important
Information
Strip Port
This is where you insert:
• A blood glucose test strip
• A blood β-Ketone test strip
• A glucose calibrator
• A ketone calibrator
• Data cable (not included) for uploading
results to a computer
Mode Button
Use this button to:
• Turn monitor ON and OFF
• Access monitor setup options
• Access and save monitor settings
• Access previous results and averages
Forward Button
Back Button
Use these buttons to:
• Review and select monitor settings
• Review results and averages
Backlight Button
Use this button to:
• Turn backlight ON and OFF
Battery Compartment
This is where the battery is installed.
• If your monitor does not turn on, check that
your battery is installed properly.
• For new battery installation, see Chapter 10.
IMPORTANT: Avoid getting dust, dirt, blood, control
solution, water, or any other substance in the receiver's
test strip port or data port.
6
To Next Page
Loading...
