2-6 IP35/IP35-E
Base Memory
This item displays the amount of base memory installed in the system. The value of the base
memory is typically 640K for systems with 640K or more memory size installed on the
motherboard.
Extended Memory
This item displays the amount of extended memory detected during system boot-up.
Total Memory
This item displays the total memory available in the system.
2.3 Advanced BIOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Hyper-Threading Technology Enabled Item Help
Quick Power On Self Test Enabled
►
CPU Feature Press Enter
►
Hard Disk Boot Priority Press Enter
First Boot Device Floppy
Second Boot Device Hard Disk
Third Boot Device SATA CDROM
Boot Other Device Enabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Security Option Setup
MPS Version Ctrl For OS 1.4
Report No FDD for OS No
Delay IDE Initial (Secs) 0
Full Screen LOGO Show Enabled
Disable Unused PCI Clock Yes
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Hyper-Threading Technology
This item is used to enable the functionality of the processor with Hyper-Threading Technology
and will appear only when using such processor.
The Hyper-Threading Technology helps your PC work more efficiently by maximizing processor
resources and enabling a single processor to run two separate threads of software
simultaneously, bringing forth greater performance and system responsiveness when running
multiple applications at once.
Quick Power On Self Test
When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on
the system. The BIOS shorten or skip some check during the POST.
To Next Page
Loading...
