Abit IP35 Pro - Page 34

2-8 IP35 Pro
 FanEQ Control
μGuru Utility v1.01C
ABIT EQ
FanEQ Control
► 1st FanEQ Group Press Enter Item Help ►►
► 2nd FanEQ Group Press Enter
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
 1st FanEQ Group
Click <Enter> key to enter its submenu (1st FanEQ Group):
μGuru Utility v1.01C
ABIT EQ
1st FanEQ Group
CPU FanEQ Control Enabled Item Help ►►►
-Reference Temperature CPU Temperature
-Control Temperature High 66°C/150°F
-Control Temperature Low 35°C/95°F
-Fan PWM Duty Cycle High 100 %
-Fan PWM Duty Cycle Low 60 %
SYS FanEQ Control Enabled
-Reference Temperature SYS Temperature
-Control Temperature High 40°C/104°F
-Control Temperature Low 30°C/86°F
-DC Fan Voltage High 12.0 V
-DC Fan Voltage Low 8.0 V
AUX1 FanEQ Control Enabled
-Reference Temperature SYS Temperature
-Control Temperature High 40°C/104°F
-Control Temperature Low 30°C/86°F
-DC Fan Voltage High 12.0 V
-DC Fan Voltage Low 8.0 V
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU/SYS/AUX1 FanEQ Control
When set to [Enabled], these items control the CPU, SYS, and/or AUX1 fan speed by the
following setting combinations.
- Reference Temperature
This item selects the reference point for taking temperature among the available options of CPU,
SYS, and PWM Temperature.