Abit IP35 Pro - 2.5 Integrated Peripherals

BIOS Setup
IP35 Pro 2-17
2.5 Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
► OnChip SATA Device Press Enter Item Help
► OnChip PCI Device Press Enter
► Onboard PCI Device Press Enter
Onboard FDC Controller Enabled

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
 OnChip SATA Device
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
OnChip SATA Device
Bus Master Enabled Item Help
SATA Mode IDE

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Bus Master
This option enables or disables the bus mastering capability under the DOS environment.
SATA Mode
This item selects the mode for devices connected through SATA1~SATA6 ports.
[IDE]: The on-chip Serial ATA served as IDE mode.
[RAID]: The on-chip Serial ATA served as RAID mode.
[AHCI]: The on-chip Serial ATA served as AHCI (Advanced Host Controller Interface) mode for
advanced performance and usability.