Abit IP35 Pro - Temperature Monitoring

BIOS Setup
IP35 Pro 2-5
 Temperature Monitoring
Click <Enter> key to enter its submenu:
μGuru Utility v1.01C
ABIT EQ
Temperature Monitoring
Reading Shutdown
Enable
Shutdown
Temp.
Beep
Enable
Beep
Temp.
(*)CPU Temperature 60°C/140°F (*) 85°/185°F (*) 75°C/167°F
(*)System Temperature 35°C/95°F ( ) 65°
°
C/149°F (*) 55°C/131°F
(*)PWM Temperature 53°C/127°F ( ) 90°
°
C/194°F (*) 80°C/176°F
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
CPU, System, PWM Temperature
These items display the temperature of CPU, System, and Power Module.
- Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature
exceeds the shutdown temperature limit, the system will shutdown automatically.
- Shutdown Temp.
This item sets the temperature that will shutdown the system automatically in order to prevent
system overheating.
- Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the
CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will
sound.
- Beep Temp.
This item selects the warning temperature limit.
※ The shutdown temperature must be set higher than the warning temperature.