Abit KN9S - Page 37

BIOS Setup
KN9 SLI, KN9 Ultra, KN9S 3-3
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
- External Clock
This item selects the external clock frequency. Due to the specification limit of the CPU you
installed, the speed you set over its standard bus speed is supported, but not guaranteed.
- PCIE Clock
This item selects the clock frequency for PCI Express slot.
Voltages Control
This option allows you to switch between the default and user-defined voltages. Leave this
setting at default unless the current voltage setting cannot be detected or is not correct. The
option “User Define” enables you to select the following voltages manually.
- CPU Core Voltage
- DDR2 RAM Voltage
- DDR2 Ref Voltage
- MCP55P Voltage
- HyperTransport Voltage