ATA Installation Utility for the Windows
®
NT 4.0 Server / Workstation G-1
User’s Manual
Appendix G ATA Installation Utility for the
Windows
®
NT 4.0 Server /
Workstation
In this section we will show you how to install the ATA Utility to your Windows
®
NT 4.0
Server/Workstation operating system. All screen shot are from Windows
®
NT 4.0 server
version.
First enter into “Control Panel” and then
“SCSI Adapters”.
You will note that no Intel ATA devices are
recognized by the system.
Exit the Device Manager and insert the SL6 CD-Title into your CD-ROM drive. It should
execute the program automatically. If not, you can go to the CD location and execute the
execution file from the main directory of this CD-Title. After it is executed, the screen
below will appear.
To Next Page
Loading...
