BIOS Setup 3-15
User’s Manual
Floppy 3 Mode Support:
Four options are available: Disabled ) Driver A ) Driver B ) Both. The default setting is
Disabled. 3 Mode floppy disk drives (FDD) are 3 1/2” drives used in Japanese computer
systems. If you need to access data stored in this kind of floppy, you must select this mode,
and of course you must have a 3 Mode floppy drive.
Video:
You can select the VGA modes for your video adapter, four options are available:
EGA/VGA ) CGA 40 ) CGA 80 ) MONO. The default setting is EGA/VGA.
Halt On:
You can select which type of error will cause the system to halt. Five options are available:
All Errors ) No Errors ) All, But Keyboard ) All, But Diskette ) All, But Disk/Key.
You can see your system memory list in the lower right box, it shows the Base Memory,
Extended Memory and total Memory size configurations in your system. It is detected by the
system during boot-up procedure.
To Next Page
Loading...
