Abit SL6 - Page 70

3-40 Chapter3
SL6
➤
➤➤
➤
IDE Primary Master / IDE Primary Slave:
Two options are available: Enabled and Disabled. The default setting is Disabled. If any
primary IDE master/slave I/O activity occurs, it will cause the computer to re-count the
time elapsed.
➤ IDE Secondary Master / IDE Secondary Slave:
Two options are available: Enabled and Disabled. Default setting is Disabled. If any
secondary IDE master/slave I/O activity occurs, it will cause the computer to re-count
the time elapsed.
➤
➤➤
➤
FDD, COM, LPT Port:
Two options are available: Enabled and Disabled. Default setting is Enabled. If any
floppy disk, COM ports and Parallel port I/O activity occurs, it will cause the computer
to re-count the time elapsed.
➤
➤➤
➤
PCI PIRQ[A-D]#:
Two options are available: Enabled and Disabled. Default setting is Disabled. If any
INTA~INTD signal activity occurs, it will cause the computer to re-count the time
elapsed.