1-2 Chapter 1
10. Back Panel I/O
• 1x PS/2 keyboard, 1x PS/2 mouse
• 1x Serial port connector, 1x Parallel port connector
• 1x AUDIO connector (Rear-Left / Rear-Right, Center/Subwoofer, S/PDIF Output, Mic-In,
Line-In, Front-Left/Front-Right)
• 2x USB connectors
• 2x USB connectors, 1x RJ-45 LAN connector
11. Miscellaneous
• ATX form factor
• Hardware Monitoring - Including Fan speed, Voltages, CPU and System temperature
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be
able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
Specifications and information contained herein are subject to change without notice.
VI7
To Next Page
