BIOS Setup 3-21
3-8. PC Health Status
Shutdown Temperature:
This item sets the temperature that would shutdown the system automatically in order to prevent system
overheats.
NOTE: This item only works for the OS with ACPI activated.
CPU Warning Temperature:
This item selects the CPU’s warning temperature limit. Once the system has detected that the CPU’s
temperature exceeded the limit, warning beeps will sound.
NOTE: The onboard hardware monitor function is capable of detecting these system health conditions. If
you want a warning message to pop-up or a warning alarm to sound when an abnormal condition occurs,
you must install the “Hardware Doctor” utility. This utility is included in the “Driver & Utility CD” that
came packed with this motherboard.
Shutdown When CPU FAN Fail:
When set to [Enabled], the system will be shut down if the CPU fan is not running.
NOTE: This item only works for the OS with ACPI activated.
All Voltages, Fans Speed and Thermal Monitoring:
These unchangeable items list the current status of the CPU and environment temperatures, fan speeds,
and system power voltage.
NOTE: The hardware monitoring features for temperatures, fans and voltages will occupy the I/O
address from 294H to 297H. If you have a network adapter, sound card or other add-on cards that might
use those I/O addresses, please adjust your add-on card I/O address to avoid using these addresses.
User’s Manual
To Next Page
Loading...
