3-10 Chapter 3
VL6
it can support. Six options are available: None
'
360K, 5.25 in.
'
1.2M, 5.25in.
'
720K,
3.5 in.
'
1.44M, 3.5 in.
'
2.88M, 3.5 in.
Floppy 3 Mode Support:
Four options are available: Disabled
'
Driver A
'
Driver B
'
Both. The default setting is
Disabled
. 3 Mode floppy disk drives (FDD) are 3 1/2” drives used in Japanese computer
systems. If you need to access data stored in this kind of floppy, you must select this mode,
and of course you must have a 3 Mode floppy drive.
Video:
You can select the VGA modes for your video adapter, four options are available:
EGA/VGA
'
CGA 40
'
CGA 80
'
MONO. The default setting is EGA/VGA.
Halt On:
You can select which type of error will cause the system to halt. Five options are available:
All Errors
'
No Errors
'
All, But Keyboard
'
All, But Diskette
'
All, But Disk/Key.
You can see your system memory list in the lower right box, it shows the
Base Memory
,
Extended Memory
and
total Memory
size
configurations in your system. It is detected by the
system during boot-up procedure.
To Next Page
Loading...
