ABL eMH1 User Manual

APPENDIX
25
The absence of an explicit marking of trademarks used in this manual must not lead to
the conclusion that a name is free from the rights of third parties.
CE certification and compliance declaration
The eMH1-EVSE 5X2 charging station carries the CE mark.
The respective compliance declarations can be obtained from
ABL SURSUM Bayerische Elektrozubehör GmbH & Co. KG
on request and are available at www.abl.de for download.
Glossary & Definitions
This table lists and explains important abbreviations from the wider eMobility area.
ABBREVIATION DESCRIPTION MEANING
BEV
Battery
Electric
Vehicle
Electric vehicle (100% electric use)
DC-RCM
Direct Current
Residual Current
Monitor
Monitoring device for detecting DC fault cur-
rents
GSM
Global
System
for Mobile Communi-
cations
Standard for fully digital mobile networks
HEV
Hybrid
Electric
Vehicle
Hybrid vehicle (combination of a classic com-
bustion engine and an electric motor with
kinetic energy recovery system)
LED Light Emitting Diode
Light-emitting diode
MCB
Miniature Circuit
Breaker
Residual current circuit breaker
OCPP
Open Charge Point
Protocol
Communication protocol between charg-
ing station and service providers (platform-
dependent)
PHEV
Plug-In Hybrid
Electric
Vehicle
Plug-in hybrid vehicle (combination of classic
combustion engine and electric motor)
RCCB
Residual Current
operated Circuit-
Breaker
FI residual current circuit breaker
RCD
Residual Current
protective Device
FI residual current circuit breaker
RCM
Residual Current
Monitor
Monitoring device for the detection of fault
currents of a critical value

ABL eMH1 Specifications

General

Model	eMH1
Category	Battery Charger
Charging Power	3.7 kW
Connector Type	Type 2
Protection Class	IP54
Operating Temperature	-25°C to +40°C
Charging Current	16 A
Input Voltage	230 V