All menu functions are showing as below table.
Mimic
Display
、
、
measurements. Please refer to section 4-3 for more
Command
(1)
Operation
• Normal mode
• ECO mode
• Converter mode
• Shutdown
• Shutdown converter expect bypass
• Cold start precharge ready
Buzzer&Alarm
• Enable/Disable buzzer
• Clear latch alarm and buzzer.
Battery Test
• Battery Test.
• Turn off the battery test.
Monitor
Identification Display UPS information
Real Time
Information
Display real time measurements of input, output, bypass
and battery.
Maintenance
Code
Display the maintenance code for technician to check
the status of the UPS.
Version Disply the control MCU software and firmware version.
Configuration
Alarm
Set alarm latch function.
• General Alarm
• Mains Alarm
• Bypass Alarm
• Over Temperature
• Battery Low
• Inverter Overload
• Bypass Overload
• Emergency Stop
Main
Select the measurements on Mimic Display.
Bypass
Output
49
192321262008007
To Next Page
Loading...
