Abloy DA400 - Fire Door System According UL Requirements; Battery Adapter Usage for Fire Doors

27
FIRE DOOR SYSTEM ACCORDING UL REQUIREMENTS
Battery adapter is used in the fire doors when there is a need to meet e.g the UL
requirements. In the adapter there is two relay outputs and one input.
The outputs are power alarm and battery alarm. The input is for connecting
smoke detectors. The power alarm indicates if there is a power failure and the
battery alarm indicates if the battery voltage drops under 11.5V.
Battery alarm reset
Push to reset the alarm on the
adapter
Battery alarm keep
If the jumper is on,
the battery alarm stays
on until the reset-button
is pressed. (otherwise
there is no keep function)
Fire detector input:
If the jumper is on,
the adapter requires N.O
output from the fire detector
(otherwise N.C)
The jumper is on
The jumper is off
POWER ALARM
BATTERY ALARM
FIRE DETECTOR (N.C./N.O. relay output)
1
2
3
4
5
6
NO
NO
C
C
CONTROL
UNIT
BATTERY
ADAPTER
950596
27
26
25
24
23
22
21
20
19
1
2
3
4
5
6
7
8
9
Yellow
NO
POWER ALARM
BATTERY ALARM
FIRE DETECTOR (N.C./N.O. relay output)
NO
C
C
White
Red
Blue
Red
Black
Blue
Black
3