Abloy DA400 - External Connections

20
CONTROL UNIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
6) Resistor
1000 ohm
Safety detector
3) Locking circuit
7) Lock control
relay
NO
NC
C
8) GND
+12V DC
GND
+24V DC
Max. output current 12VDC / 0.5A or 24VDC / 0.8A
4) Outside
impulse
5) inside
impulse
1) Sequencing
sequence control
Sequence control; master and separate operator
Sequence control; slave operator
2)Outside impulse inhibit/
Main power state
EXTERNAL CONNECTIONS
Only voltage free switches with a normally open output can be used to control
the ABLOY automatic swing door operator. Moreover, the total resistance of the
control switch and its wiring must not exceed 100 ohm, when the switch is
closed.
Such connections include a program selector, a normal or delayed pulse and a
locking circuit connection. One of the wires running to the switch carries +5 V
and the other the ground level of the control unit, when the switch is open.
JUMPERS