aboni HydroTracer FMX User Manual

Selection Menus & Status Display
30
4.4 Status Display & Information field
In the main menu (cf. „2.1 The procedure step by step“ field „(C)“ and „(D)“) you get
information about the connection of the HydroTracer (and the serial scale), as well as a status
message about the HydroTracer itself.
If the HydroTracer and a serial
balance are connected, you will
receive this information in the
Information field (C).
If no scale is connected, only the
HydroTracer with the COM port
number is displayed.
The field (D) gives you information
about the operating status of the
HydroTracer.
Three status messages are possible here:
1. "Ready" – the HydroTracer is ready for a measurement
2. “Warm Up" – the HydroTracer is not yet on stand-by temperature and is warmed up
3. “Systemtest” – the HydroTracer performs an internal system test. This happens every
time after switching on the instrument.
4. "Cool Down" – the HydroTracer is currently cooling down to the stand-by temperature
of 50 °c

aboni HydroTracer FMX Specifications

General

Brand	aboni
Model	HydroTracer FMX
Category	Measuring Instruments
Language	English