This mask appears. Click "Next >>"
1.2
Connecting the HydroTracer
Switch on your PC (if not done already).
Connect the power supply cable on the rear side of the HydroTracer. Connect the HydroTracer
with the data cable (USB) to your PC. Switch on the power. If the HydroTracer is properly
connected to the power supply, the system fan runs and the green LED glows.
The HydroTracer is now ready for operation.
In the Windows© Device Manager, a
new entry "USB serial port" appears
under the "Ports (COM & LPT)"
section when the HydroTracer is
connected to the computer via USB
cable.
To Next Page
Loading...
Need help?
General
