ABS 100 - Troubleshooting: Silent Motor Issue; Carbon Filter Maintenance

12 Installation and Operating Instructions
ABS lifting station Piranhamat
6.3.2 Piranhamat 100/120 does not function and motor is silent.
Withdraw plug and wait approximately 30 minutes.
After this waiting period push back in the plug.
Water sources should not be used in this period.
If after this waiting period the Piranhamat 100/120 does not function correctly, then withdraw the plug and call
the ABS service.
NOTE Inthecaseofanyqueries,itisessentialthatthepumptypeandpartnumberare
given.
6.3.3 Changing the Carbon Filter
NOTE Normallyitisonlynecessarytochangethelterifdamagehasoccurred.
Press the latches (9/2) on the tank cover (9/1) lightly to the outside and lift off the tank cover (9/1).
Change the carbon lter (9/4).
Fit tank cover (9/1).
m
The latches (9/2) must correctly lock into position.
-
-
-
-
-
-