⚫ Before using this product check all electrical distribution equipment, cables and all connected
devices, and make sure all meet current requirements.
⚫ Use appropriate power cables. Please select the appropriate power cables according to the
required power consumption and current capacity, and ensure the power cables are not damaged,
aged or wet. If any overheating occurs, replace power cables immediately.
⚫ For any other questions, please consult professionals.
Beware of Fire!
⚫ Use a circuit breaker or fuse protection to avoid fire caused by overloading of
power supply cables.
⚫ Ensure good ventilation around the display, controller,
power supply and other devices, and keep a minimum 0.1meter gap between
these devices/objects.
⚫ Do not stick or hang anything on the screen.
⚫ Do not modify the product, do not add or remove parts.
⚫ Do not use the product when the ambient temperature is over 50 ℃.
Beware of Injury!
⚫ Warning: Wear a helmet to avoid injury.
⚫ Ensure any structures used to support, fix and connect the display can
withstand at least 10 times the weight of all the equipment.
⚫ When stacking products, please hold products firmly to prevent tipping or
falling.
⚫ Ensure all components and steel frames are securely and solidly installed.
⚫ When installing, maintaining, or moving the product, ensure the working
area is isolated from other area, and ensure the working platform is securely
and stably fixed.
⚫ In the absence of proper eye protection, please do not look directly at the lit
screen from within 1 meter.
⚫ Do not use any optical devices that have converging functions to look at the
screen to avoid burning the eyes.
Warning: Beware of loads when hanging.
LED lamps used on the modules are sensitive and can be damaged by ESD
(electrostatic discharge). To prevent damage to LED lamps, do not touch them
when the device is running or switched off.
Warning: The manufacturer shall not bear any responsibility for any incorrect,
inappropriate, irresponsible or unsafe installation.