Absen A Series User Manual

A series user manual
8 / 24
Service Hotline:400-700-3278
2.3 Preparation before installation
Under the conditions of ensuring sufficient installation strength and beauty, the steel structure of
the outdoor LED display should be a tight as possible.
Before installing the cabinets, check whether the steel structure can meet the requirements of
installation：
1) The underlying structure should be firm.
2) The width and height of the structure are appropriate.
3) The distance between the two square bars is the same (when the cabinets sizes are the same).
4) Maintenance channel should not block the way to open power box and dismantle modules.
5) The steel structure is welded firmly and fully, and the surface is uniform and beautiful.
2.4 Installation tools and accessories
List of
installation
tools
Type of tool
effect
picture
Adjustable
wrench
Fix the connecting piece
of the cabinet and
tighten the bolt
Rubber
hammer
Adjust the flatness of the
box and the connecting
piece
Multi-meter
Measuring power lines
and distribution boxes
Laser level
Measuring structure
Front
maintenance
tool
Remove the modules
Installed
accessories
Connecting
Plates
Bolt

Absen A Series Specifications

General

Brand	Absen
Model	A Series
Category	Digital Signage
Language	English