Here you have the option of selecting
the mains frequency for your camera.
The following selections are
available: Indoor (50Hz), Indoor
(60Hz) and Outdoor.
Standard value Europe: 50 Hz
Here you can adjust the brightness of
the night image.
A higher level brightens the picture
more, a lower level less.
As soon as there are objects in the
near surrounding of the camera, it is
advisable to set the intensity to low to
avoid reflections in the image, but
this will reduce the range of the
LEDs.
Change the position of the timestamp by
briefly holding and sliding the timestamp
to the desired corner.
Change the color of the timestamp by
clicking on the desired color.
Remove the time stamp by clicking once
on the image.
Changes are only adopted when
saved. The "Reload" button refreshes
the preview image.
To Next Page
Loading...
