AC Infinity CONTROLLER 69 PRO - Timer Modes: To ON and To OFF

29
PROGRAMMING
TIMER TO ON MODE
Pressing the up or down button sets a
countdown time. During the countdown, your
device will be set to OFF. Once the timer ends,
your device will trigger to turn on. If there is
a level set in OFF Mode, the devices will run
at that level during the countdown and when
triggered to turn off.
The countdown will begin if no buttons are
pressed for 5 seconds. The time left on the
countdown is shown on the lower right corner
of the display above the setting. Leaving the
timer mode while the countdown is running will
pause it until you return to this mode.
TIMER TO OFF MODE
Pressing the up or down button sets a
countdown time. During the countdown, your
device will be set to ON. Once the timer ends,
your device will trigger to turn off. If there is a
level set in OFF Mode, the devices will run at
that level after the end of the countdown.
The countdown will begin if no buttons are
pressed for 5 seconds. The time left on the
countdown is shown on the lower right corner
of the display above the setting. Leaving the
timer mode while the countdown is running will
pause it until you return to this mode.
START
TIMER TO OFF
(COUNTDOWN END POINT)
4
0
m
i
n
.
t
o
O
F
F
D
e
v
i
c
e
O
F
F
TIMER TO ON
(COUNTDOWN END POINT)
START
2
0
m
i
n
.
t
o
O
N
D
e
v
i
c
e
O
N