38
PROGRAMMING
BUFFER TEMPERATURE SETTING
The buffer figure will create a trigger-off point
below your set trigger point to prevent your
device from shutting off too quickly. Press the
up or down button to cycle through buffer range
from 0°F to 8°F (or 0°C to 4°C).
In high temperature triggers, your device will
turn on, only turning off when the temperature
falls below your buffer setting.
In low temperature triggers, your device will turn
on, only turning off when the temperature rises
above your set buffer setting.
EXAMPLE
In this example, your High Temperature Trigger
is set at 89°F and your Temperature Buffer is
set at 6°F. Your device will trigger on when it
meets or rises above 89°F, and only trigger
off when it falls below 83°F. The 83°F figure
is obtained by taking your High Temperature
Trigger of 89°F and subtracting your
Temperature Buffer of 6°F.
89
83
BUFF.
To Next Page
Loading...
Need help?
General
