19
CYCLE MODE (ON AND OFF)
Sets an ON duration and an OFF duration for
your device to cycle through continuously. Press
the up or down button to set a countdown for
your device to turn on. Then press the mode
button and use the up or down button to set a
countdown for your device to turn off.
The countdown will begin if no buttons are
pressed for 5 seconds. Leaving the CYCLE mode
while the countdown is running will pause it until
you return to this mode.
ON
PM
TO
OFF
CYCLE
OFF
PROGRAMMING
TO
ON
OFF
PM
CYCLE
TO
ON
ON
To Next Page
Loading...
