RUN mode at a Glance
51
5.
The Standard bolus symbol blinks for 5 seconds
(the bolus delivery start delay).
6.
After the bolus delivery start delay, the Pump beeps three times and then
begins to deliver the total bolus amount programmed.
A countdown of the remaining bolus amount appears on the display.
By default the increment for the Quick bolus is 0.5 U per key press.
Ask your healthcare professional to change the increment to 0.1, 0.2, 1.0
or 2.0 U per key press if necessary. You will learn how to do that your-
self in the Advanced Lesson of the training.
To Next Page
Loading...
