Accu-Chek Combo User Manual

64
18.
The next screen asks you to edit at least one
Time Block. The main purpose for this is to edit
your bG Target Range. If you have different
Target Ranges for different times of the day, edit
the Time Blocks and Target Ranges accordingly.
Press . to select next.
19.
Press = to move to the first Time Block.
Press 2 × = again to save the default ending
time. Press = again to enter the lowest blood
glucose value for the Target Range.
Edit at least one
time block by selecting
a time block
and pressing enter
Setup
Back
Next
4:00 0:00
mmol/L
8.0 mmol/L
Cancel
Time Blocks
4.0
The display “Would you like to receive bolus
advice from your Meter?” appears.
Press , to select No.
Would you like to
receive bolus advice
from your Meter?
Setup
No
Yes
!
16.
Use =, x , z and = to set the Hypo- (Low bG)
Warning Limit.
Press . to select Next.
17.
Select the upper (Hyper)
and lower (Hypo)
limits of your bG
60 mg/dL
12.5 mmol/L
Cancel
Warning Limits
Hypo
Hyper
3.0
mmol/L

Accu-Chek Combo Specifications

General

Brand	Accu-Chek
Model	Combo
Category	Medical Equipment
Language	English