Follow the steps below:
1.
Press d to move to the STOP YOUR ACCU-CHEK screen.
Press
f to select and put the pump in STOP
mode. Your pump returns to the STOP screen
and insulin delivery stops.
2. Remove or disconnect your infusion tube set from the headset so that insulin
cannot accidentally be delivered.
3. Remove the ba
tter
y cover.
Use the battery key to turn the battery cover as
indicated by the arrow on the battery cover. Make
sure that the opening of the battery compartment
and the seal are clean and undamaged. Remove
the old battery if necessary.
4. Put the battery cover on the positive (+) end of the battery.
Hold the cover on the positive (+) end of the battery,
and insert the battery negative (-) end first into the
battery compartment.
Chapter 2: Getting Started ACCU-CHEK Spirit Insulin Pump26
To Next Page
Loading...
