9. The result appears on the display. If you
want to mark the test result as a
pre-meal or post-meal test, or with a
general marker, leave the test strip in
the meter (see the next section).
Otherwise, remove and discard the used
test strip.
Note: After a successful test, the meter turns off five seconds after the test strip is
removed.
OR
16
43149_NanoPerf_24MSTR_Ins.indd 1643149_NanoPerf_24MSTR_Ins.indd 16 11/25/08 2:49:01 PM11/25/08 2:49:01 PM
To Next Page
Loading...
