Accu-Chek Performa Nano User Manual

Chapter 1: Understanding Your New System
The Accu-Chek Performa Nano Meter
Right and Left
Arrow Buttons –
Press to enter
memory, adjust
settings, and scroll
through results.
Display –
Shows results,
messages, and
results stored in
memory.
Test Strip Slot –
Insert test strip here.
Infrared (IR) Window –
Transfers data from the
meter to a computer or
PDA.
On/Off/Set Button –
Turns the meter on or
off and sets options.
Battery Drawer –
Pull out the battery
drawer to replace
batteries, when needed.
Code Chip Slot –
Insert code chip into
this opening.
7
Front View Back View
43149_NanoPerf_24MSTR_Ins.indd 743149_NanoPerf_24MSTR_Ins.indd 7 11/25/08 2:48:58 PM11/25/08 2:48:58 PM

Accu-Chek Performa Nano Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Dimensions	69 x 43 x 20 mm
Display	LCD
Memory Capacity	500 results
Automatic Power Off	90 seconds
Battery	1 x 3V lithium battery (CR2032)
Test Strip	Accu-Chek Performa
Data Transfer	Infrared (IR)
Storage Conditions	-25°C to +70°C
Measurement Range	0.6 - 33.3 mmol/L
Weight	Approx. 40 g (with battery)
Operating Conditions	6°C to 44°C, 10% to 90% RH