Meter Setup
Using the Set-Up Mode
By using the set-up mode, you can personalize the meter to suit your lifestyle. Here are the
features you can customize in the order in which they appear in the set-up mode:
Time and date – set the time and date.
Beeper – select “On” or “OFF.”
Post-meal reminder time – select 1 hour or 2 hours.
Alarm clock – select “On” or “OFF.”
Hypo indicator – select “On” or “OFF.” If you select “On,” choose the blood
glucose level for the alert.
Using the set-up mode is easy.
Here is a general overview of the function each button performs in the set-up mode.
To enter the set-up mode• – with the meter on, press and hold until “set-up” appears.
To confirm the feature you have chosen• – press and release .
To exit the set-up mode• – press and hold until you see the flashing test strip symbol.
To adjust settings• – press and release or . To scroll faster press and
hold or .
30
43149_NanoPerf_24MSTR_Ins.indd 3043149_NanoPerf_24MSTR_Ins.indd 30 11/25/08 2:49:03 PM11/25/08 2:49:03 PM
To Next Page
Loading...
