Accu-Chek Performa Nano User Manual

Product Safety Information
Strong electromagnetic fields may interfere with the proper operation
of the meter. Do not use this meter close to sources of strong
electromagnetic radiation.
To avoid electrostatic discharge, do not use the meter in a very dry
environment, especially one in which synthetic materials are present.
Disposing of your Meter
During blood glucose measurement the meter itself may come into
contact with blood. Used meters therefore carry a risk of infection.
Please dispose of your used meter, after removing the batteries,
according to the regulations applicable in your country. For
information about correct disposal please contact your local council
and authority.
The meter falls outside the scope of the European Directive
2002/96/EC – Directive on waste electrical and electronic equipment
(WEEE).
76
43149_NanoPerf_24MSTR_Ins.indd 7643149_NanoPerf_24MSTR_Ins.indd 76 11/25/08 2:49:10 PM11/25/08 2:49:10 PM

Accu-Chek Performa Nano Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Dimensions	69 x 43 x 20 mm
Display	LCD
Memory Capacity	500 results
Automatic Power Off	90 seconds
Battery	1 x 3V lithium battery (CR2032)
Test Strip	Accu-Chek Performa
Data Transfer	Infrared (IR)
Storage Conditions	-25°C to +70°C
Measurement Range	0.6 - 33.3 mmol/L
Weight	Approx. 40 g (with battery)
Operating Conditions	6°C to 44°C, 10% to 90% RH