Accu-Chek Performa Nano User Manual

Change the code chip every time you open a new box of test strips!
9
Coding the Meter
1. Make sure the meter
is off.
2. Turn the meter over. 3. Remove the old code
chip (if there is one
in the meter) and
discard it.
43149_NanoPerf_24MSTR_Ins.indd 943149_NanoPerf_24MSTR_Ins.indd 9 11/25/08 2:48:59 PM11/25/08 2:48:59 PM

Accu-Chek Performa Nano Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Dimensions	69 x 43 x 20 mm
Display	LCD
Memory Capacity	500 results
Automatic Power Off	90 seconds
Battery	1 x 3V lithium battery (CR2032)
Test Strip	Accu-Chek Performa
Data Transfer	Infrared (IR)
Storage Conditions	-25°C to +70°C
Measurement Range	0.6 - 33.3 mmol/L
Weight	Approx. 40 g (with battery)
Operating Conditions	6°C to 44°C, 10% to 90% RH