Accu-Chek Performa Nano - Page 44

When you are setting the time for the alarm clock function, the bell symbol and
“set-up” remain on the display.
1. Press and release to
turn the meter on. The
flashing test strip symbol
appears.
2. Press and hold
until
“set-up” appears on the
display.
3. Press and release
repeatedly until you
reach the display with
the bell symbol, “OFF,”
“set-up,” and the
flashing “A-1.”
42
43149_NanoPerf_24MSTR_Ins.indd 4243149_NanoPerf_24MSTR_Ins.indd 42 11/25/08 2:49:05 PM11/25/08 2:49:05 PM