7. The minutes flash. Press
and release
or to
select 00, 15, 30, or 45.
These are the only
choices.
8. Press and release
to
confirm minutes.
9. “Set-up,” “OFF,” and the
bell symbol appear on
the display with the next
alarm (“A-2”) flashing.
You can either set a
second alarm or press
and hold
until you
see the flashing test strip
symbol to exit the set-up
mode.
44
43149_NanoPerf_24MSTR_Ins.indd 4443149_NanoPerf_24MSTR_Ins.indd 44 11/25/08 2:49:05 PM11/25/08 2:49:05 PM
To Next Page
Loading...
