6. Put the meter on a flat surface. Point the two IR windows toward each other. They
should be 3 to 10 cm apart.
7. Do not move the infrared cable
(computer), PDA, or meter during the
transfer.
8. Follow the prompts on the software.
9. The software program may shut off the
meter automatically when the data
transfer is complete.
Notes:
If the data did not transfer successfully, try again. If you still have problems, •
contact Roche.
To make the most of the download feature, you must set the time and date in the •
meter correctly.
49
43149_NanoPerf_24MSTR_Ins.indd 4943149_NanoPerf_24MSTR_Ins.indd 49 11/25/08 2:49:06 PM11/25/08 2:49:06 PM
To Next Page
Loading...
