Notes:
The meter uses two 3-volt lithium batteries, type 2032. This type of battery can be •
found in many stores. It is a good idea to have spare batteries available.
Be sure the batteries are inserted • (+) side facing down or facing away from you.
After you change the batteries, the meter prompts you to confirm the meter’s time •
and date settings. All test results are saved in memory.
Always replace both batteries at the same time and with the same brand.•
60
43149_NanoPerf_24MSTR_Ins.indd 6043149_NanoPerf_24MSTR_Ins.indd 60 11/25/08 2:49:08 PM11/25/08 2:49:08 PM
To Next Page
Loading...
