Acculab ECL6 - Page 26

26
b. Sample print outputs in different applications
1. Short printing mode:
1.1 Normal weighing
G + 200 g
1.2 Counting
N + 400 g
Pcs 10 pcs
W.Ref. 40 g
1.3 Checkweighing
Ex 1: If the weight on the pan is <10% of lower limit set.
N+ 0g
Chk.
Ex 2: If the weight on the pan < lower limit set.
N + 100 g
Chk. LO
Ex 3: If the weight on the pan is between the set limits.
N + 200 g
Chk. OK
Ex 4: : If the weight on the pan > upper limit set.
N + 410 g
Chk. HI
1.4 Unit toggling
Ex 1: Before toggle key is pressed
G + 300 g
Ex 2 : After unit is toggled to kilograms.
G + 0.300 kg
2. Block printing mode:
2.1 Normal weighing
Ex 1: If tare is zero
G + 200 g
Ex 2: If tare is not zero
G + 100 g
T + 50 g
N + 50 g
2.2 Counting mode
Ex 1: If tare is zero.
G + 400 g
Pcs 10 pcs
W.Ref. 40 g
Ex 2: If tare value is set.
G + 440 g
T + 400 g
N + 80 g
Pcs 2 pcs
W.Ref. 40 g
2.3 Check weighing mode
Ex 1: If the weight on the pan is <10% of lower limit set,
with zero tare.
G+ 0g
Chk.
LL 200 g
HL 400 g
Ex 2: If the weight on the pan < lower limit set, with zero
tare.
G + 100 g
Chk. LO
LL 200 g
HL 400 g
Ex 3: If the weight on the pan is between the set limits,
with zero tare.
G + 200 g
Chk. OK
LL 200 g
HL 400 g