Acculab ECL6 - Page 27

27
Ex 4: If the weight on the pan > upper limit set.
G + 410 g
Chk. HI
LL 200 g
HL 400 g
Ex 5: If the weight on the pan is <10% of lower limit set,
with a set tare value.
G + 400 g
T + 400 g
N+ 0g
Chk.
LL 200 g
HL 400 g
Ex 6: If the weight on the pan < lower limit set, with a set
tare value.
G + 800 g
T + 400 g
N + 400 g
Chk. OK
LL 200 g
HL 400 g
Ex 7: If the weight on the pan > upper limit set, with tare
value set.
G + 810 g
T + 400 g
N + 410 g
Chk. HI
LL 200 g
HL 400 g
2.4 Unit toggling
Ex 1: Before toggle key is pressed.
G + 300 g
T + 200 g
N + 100 g
Ex 2 : After unit is toggled to kilograms.
G + 0.300 kg
T + 0.200 kg
N + 0.100 kg
3. Continuous printing mode
3.1 Normal weighing
Ex 1: If tare is not active
G + 200 g
Ex 2 : If tare value is present.
N + 200 g
3.2 Counting mode
default:
Pcs 2 Pcs
Ex 1: If tare is not active (G/N key)
G + 200 g
Ex 2 : If tare Value is present. (G/N key)
N + 200 g
3.3 Checkweighing
Ex 1: If tare is not active
G + 200 g
Ex 2 : If tare value is present.
N + 200 g
3.4 Unit toggling
Output 1: Before toggle key is pressed
G + 300 g
Output 2: After the unit is toggled to kilograms.
G + 0.300 Kg