Accutron FlowTrax IS - Page 20

16 | Page
[2R] Accutron/J Minimum
Sig. Duration (ms):
0.600
Minimum valid signal duration.
[2S] Accutron/J Sampling
Period (ms):
300.000
Signal sampling period.
Modbus Menu
[3A] Enter Modbus address:
Enter value 1-247
Enter a Modbus Slave address for this device.
[3B] Select Modbus port
baud rate:
A - 9600 B - 19200
C - 57600 D - 115200
Select the baud rate for RS485 output.
[3C] Select Modbus
parity:
A None B Odd
C Even
Set the Modbus parity for this device.
[3D] Select Modbus
Stop Bits:
A 1 stop bits
B 2 stop bits
Set the Modbus Stop bits for this device.
[3E] Select Modbus
TX delay:
A 0ms B 50ms
C 100ms
Delays the response time of this device to
Modbus request.