Acer Aspire 1600 - External Input Devices

61 Aspire 1600
Disassembling the LCD
Removing the Middle Cover
1.
See “Removing the Battery Pack” on page 56
2.
Pry up the middle cover with a plastic flat screwdriver, pull the middle cover up carefully
3.
Turn the middle cover over and disconnect the launch board cable from the launch board and then detach
the middle cover away from the main unit.
.
Removing the Launch Board
1.
See “Removing the Battery Pack” on page 56
2.
See “Removing the Middle Cover” on page 61
3.
Remove the two screws and then detach the launch board from the middle cover.