Chapter 2 48
Boot Options
Users can press F12 during POST to enter the Boot Options Menu directly (See “Multi-Boot Menu” on page
35), or by entering BIOS SETUP utility, Boot Options item.
NOTE:
There are four defaulted options that allow users to specify the boot device sequence. If the “Boot on
LAN” option is enabled, then, Realtek Boot Agent will be shown as the fifth option.
The priority of options from top to bottom is 1
st
, 2
nd
, 3
rd
,and 4
th
.
If the Removable Device or Hard Drive option has multi devices, show ‘+’ in front of option and show each
device information.
NOTE:
Keys used to view or configure devices:
<
e> expands or collapses devices with a + or -
<
p>and <q> moves the device up and or down.
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Item Specific Help
+Removable Devices
+Hard Drive
CD-ROM Drive
D2D Recovery
<Shift + 1> enables or
disables a device.
<+>/<Space> or <-> moves the
device up or down.
<d> removes a device that is not
installed.
F1 Help
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
To Next Page
Loading...
